Aluminium extrusion puller — single and double with flying saw
Indicative price range
15,000–45,000 EUR (EXW)
Indicative range — an invitation to negotiate, not a binding offer. Verified: 2026-07-18.
The puller grips the profile as it emerges from the die and draws it along the run-out table under constant, controlled tension, synchronised with the ram speed. The payoff is easy to measure: profiles come out straight, without waving or twisting, and touch nothing but the table belts — less stretcher work, less end scrap, and the ability to run thin-wall and multi-cavity dies that come out crooked without one. Many plants know the symptom before they know the machine's name: if your profiles need heavy stretching to straighten, or you lose metres to bent ends, this is the missing link in the line.
Two layouts are available. The double puller with flying saw (for presses around 1000 tonnes, 5″ billet) runs two heads alternately — while one guides the profile, the other returns at 180 m/min, so the press never waits. Pulling force is adjustable from 10 to 120 kg, working speed up to 60 m/min; the flying saw with a ø500 mm blade cuts the profile on the move along a 5 m track, and the 130×320 mm clamps take interchangeable shaped inserts for different sections. Servo drives, Schneider electrics.
The single puller (for presses around 2000 tonnes, 8″ billet) is the simpler, cheaper machine: a 30 HP Siemens AC motor, pulling force smoothly adjustable from 5 to 400 kg, an integrated 26″ hot saw (5.5 kW) and a Siemens S7-200 PLC. Chain drive, hydraulic clamping.
A puller can be added to an existing press — we size it from your press tonnage, run-out table length and typical sections. For a new plant we supply it matched to the press from the same maker: one FAT, one delivery, machines built to work together. Line budgets are covered in our cost guide. (US spelling: aluminum extrusion puller.)
Specification
| Versions | single / double with flying saw |
|---|---|
| Pulling force | 10–120 kg (double) / 5–400 kg, smoothly adjustable (single) |
| Speeds (double) | pulling up to 60 m/min, return 180 m/min |
| Cutting | flying saw ø500 mm, 5 m track (double) / 26″ hot saw, 5.5 kW (single) |
| Clamps | 130 × 320 mm, interchangeable shaped inserts |
| Drive / control | servo + Schneider electrics (double); Siemens 30 HP motor, Siemens S7-200 PLC (single) |
| Sizing | matched to press tonnage (typically 1000–2000 t) and run-out table length |
CE status
CE: machine requires EU conformity work — we arrange a compliance quote
Puller w standardzie fabrycznym wymaga dostosowania do wymogów UE (osłony strefy cięcia, obwody bezpieczeństwa, dokumentacja) — zakres i koszt dostosowania wyceniamy przed zakupem.
→ How we workTransaction terms
- Production lead time: 8–12 wks
Applications
Works with extrusion presses from roughly 600 to 2500 t: thin-wall and multi-cavity profiles, window and door systems, precision and industrial profiles where straightness matters, heat sinks.
Who it is for
Extruders completing a new line, and plants retrofitting existing presses where profiles need excessive stretching or generate end scrap.
FAQ
How much does an aluminium extrusion puller cost?
Indicatively €15–45k EXW: the lower end covers the single puller with hot saw, the upper end the double puller with flying saw and servo drives. The exact quote depends on press tonnage, track length and equipment.
Single or double with flying saw?
The single puller suits lower outputs and longer cycles — simpler and cheaper. The double works alternately (the free head returns at 180 m/min), so the press never waits and the profile is cut on the fly — the choice for short cycles and thin-wall sections. We advise after reviewing your production mix.
Can a puller be retrofitted to my existing press?
Yes — it is a common upgrade. We need the press tonnage and maker, run-out table length and your profile sections; the puller synchronises with extrusion speed through the control system. EU conformity work on the saw area is quoted as part of the offer.