Industrial furnaces for aluminium extrusion plants
A whole family of furnaces works around the press, and they largely decide the plant's quality and energy bill. We supply the complete set: billet heating furnaces with hot log shear or hot saw, aging ovens (T5/T6 hardening), billet homogenizing furnaces, die ovens and vacuum die nitriding furnaces.
Furnaces run on natural gas, LPG or diesel (electric versions available), with multi-zone temperature control, Siemens or Mitsubishi PLCs and temperature data logging. Configuration (log length, basket count, throughput) is matched to your press and floor space.
Every furnace page shows an indicative price range and a realistic lead time; smaller furnaces can be ready to ship in 3-4 weeks.
Machines in this category
- Billet heating furnace with hot log shearGas-fired multi-log billet heating furnace: 3-15″ logs, 3-8 m length, hot shear. Indicatively €45-95k EXW. Feeds presses from 530 to 5400 t.45,000-95,000 EUREXW
- Single billet heating furnace with hot shearSingle-billet furnace for extrusion presses: 25-30 min from cold, 100-110 s shear cycle per 1 m, ±1 mm tolerance. Indicatively €25-50k EXW.25,000-50,000 EUREXW
- Fast billet heating furnace (25-35 min)Gas-fired fast billet heating furnace: cold to extrusion temperature in 25-35 min, 6061/6063 alloys, built for single-shift plants. Indicatively €30-60k EXW.30,000-60,000 EUREXW
- Aging oven for aluminium profiles (4-18 baskets)Aging oven for T5/T6 hardening of aluminium profiles: 4-18 baskets, 10-20 t per load, gas or diesel fired, Siemens PLC. Indicatively €40-85k EXW.40,000-85,000 EUREXW
- 15 t billet homogenizing furnace (8″ billets)15 t billet homogenizing furnace for 8″ aluminium logs: 580°C ±5°C, 4 heating zones, separate cooling chamber with air + water. Indicatively €60-120k EXW.60,000-120,000 EUREXW
- Die heating oven (drawer type, 4-12 dies)Drawer-type die oven for aluminium extrusion presses 1000-2000 t: 4-12 dies per chamber, ~90 min heat-up, infrared electric heating, approx. 32 kW. Indicatively €6-16k EXW.6,000-16,000 EUREXW
- 45 kW die nitriding furnace (ø500×1000 mm chamber)45 kW vacuum-purged gas nitriding furnace for aluminium extrusion dies: ø500×1000 mm chamber, 650°C, ±5°C uniformity, <80 min heat-up. Indicatively €25-50k EXW.25,000-50,000 EUREXW